fbpx

Incoming TAPI

If you want to use TAPI also for incoming calls, the normal TAPI is not enough. You need to install Xtelsio TAPI for Asterisk which needs a license (MIXvoip can provide one).

  • Install the software and open the “xtelsio TAPI for Asterisk”
  • Click on Settings
  • Enter the internal IP of the cloud in IP Address field
  • Enter the manager username. Its your username+full
  • Enter the manager password (will be provided by MIXvoip)
  • Click Connect

You are now connected and logged in.

Connect asterisk

Configure TAPI line

  • Select a TAPI line and click settings
  • Set the Channel to SIP/$PbxUsername_$Extension
  • Set Your phone number to $PbxUsername_$Extension
  • Set Special device to Gemeinschaft
Configure line
  • Click on Settings next to Special device
  • In URL-Pfad enter the click2call URL click2dial.php?username=$Pbxusername_$Extension&password=$Extensionpassword 
  • In Username enter $PbxUsername_$Extension
  • In From enter $Extension
  • In cidnum enter $Extension
Special device settings
Once this is done, the lines should work. You can test it with EPhone from Estos.
Last but not least the TAPI lines need to be integrated / activated in the software of the customer.